How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Herrod Your Own Question
Steve Herrod
Steve Herrod, Master's Degree
Category: Writing Homework
Satisfied Customers: 3325
Experience:  Masters in Literature and a Bachelors Degree in French with Management
Type Your Writing Homework Question Here...
Steve Herrod is online now
A new question is answered every 9 seconds

I have a question concerning the assignment posted on your

Customer Question

I have a question concerning the assignment posted on your web page
Submitted: 2 years ago.
Category: Writing Homework
Customer: replied 2 years ago.
Network Design PaperThe University has recently leased a building in Adelphi, Maryland. The building will house some offices, classrooms, library, and computer labs.Building dimensions: Length: 240 Feet, Width: 95 Feet, Height: 30 FeetThe 50-year-old two-story building has the following layout:
There will be six computer labs (in the building diagram above, these labs are the classroom with closet in them) that will be used for instruction. Each of these labs will have 22 computers (20 student computers and 1 instructor computer). Each of these labs will also have a server in the closet located inside the lab.In addition to the six computer labs, there will also be a Student Computer Lab that will provide computer access to students to do their homework. There will be 30 computers in this lab and a server in the closet.The library will also have some computers to allow students access to the library resources. There will be 10 computers for student’s use in the library, and 5 computers for Library staff.There are five lecture classrooms in the building. Each of this room will have a computer for instructor’s use.Finally, there are various offices in the building. Each of these offices will have one computer for staff use, with the exception of the Admission office that will have 5 computers for staff use.Equipment Inventory
Placement Number of
Computers Users Total Computers
6 Instructional
Computer labs 22 Student and
Faculty 132
Student Computer Lab 31 Student 31
6 various offices 6 Staff/Faculty 6
Admission office 5 Staff 5
Library 10 Student 10
Library 5 Staff 5
5 classrooms 1 Faculty 5
Server Staff To be determined by students
Network Connecting Devices IT Staff To be determined by students
Printers To be determined by studentTwo server rooms have been allocated, one on the first floor and one on the second floor.
Your task is to design the network for this new building with the following criteria:
• Student-accessed computers should be on separate network from the staff-accessed computers.
• The whole building will share one Internet access connection (T-1 link from Verizon). This connection will come into the Server Room on the first floor.
• Security is very important for UMUC as we have to protect students and employee’s data as well as any intellectual property that UMUC has on the servers and computers.
• The network has been assigned the network address for all computers and devices. For Internet routing use IP address.
• The network should use physical cable (not wireless), but do provide wireless access in the Student Lobby area.Submission should include (in no more than ten pages, excluding diagrams and references):
Network Addressing:
1. Define the subnet (based on: rooms, floor, department, or other criteria).
2. For each subnet, explain which devices/groups/users/rooms will be on this subnet, define the network address, subnet mask, and available IP addresses to be used by computers or devices.
Network Design:
1. Define the topology that will be used.
2. Select the appropriate network media to use.
3. Select the appropriate network connecting devices to use.
4. Physical layout of the computers on the floor plan.
5. List of additional servers, network devices, or network services needed to implement the network.
6. Justifications for your network design (number 1 – 5 above)
You will be evaluated on your ability to
• Implement appropriate IP addressing scheme (LabSim 5.0)
• select and justify appropriate cable media that includes the length of each cable segment and number of nodes on each segment (LabSim 2.0)
• select and justify appropriate topology such as star, bus, or ring for your network (LabSim 1.0)
• select and justify of your selected network equipments (LabSim 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0)
• select and justify appropriate network services to meet network requirements (LabSim 5.0, 6.0, 7.0, 8.0, 9.0)
• select and justify security implementation for the network (LabSim 8.0)
• use proper grammar, formatting, network terminology, and reference citations
Expert:  Steve Herrod replied 2 years ago.
Hi, do you need this assignment uploaded?
Customer: replied 2 years ago.
Yes with specific attention to Subnet and explaining which devices/groups users/rooms will be on subnet and network design especially topology. i know a patrial mesh topology can be used but I wnated to know if it is the only topology needed
Expert:  Steve Herrod replied 2 years ago.
Ok, I will upload the version used previously which was highly graded in a couple of hours
Customer: replied 2 years ago.
Expert:  Steve Herrod replied 2 years ago.
Here is the paper
Customer: replied 2 years ago.
Thanks steve. I dont think i would use it. but it explains some of the questions i have. How did you come up with the subnet aspect of the paper? i need to understand that. An can you explain why and where you would use the various topology.
Expert:  Steve Herrod replied 2 years ago.
I can't amend until next week unfortunately
Customer: replied 2 years ago.
That sucks. It's due Sunday.😭😭😭😭😱😱😱. Well you tried.
Expert:  Steve Herrod replied 2 years ago.