Volvo

Have Volvo questions? Ask a Volvo mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Volvo Questions
2000 Volvo v70 2.4l engine. starts, idles at 900 rpm, and
2000 Volvo v70 2.4l engine. starts, idles at 900 rpm, and dies after 5 minutes or when AC turned on. I just replaced the head, The cams are aligned correctly. During timing belt installation it says t… read more
eric remington
eric remington
FORMER SHOP OWNER/TECHNICIAN/INSPECTOR
associates degree
1,367 satisfied customers
Im finishing putting a Volvo Head together but need some
im finishing putting a Volvo Head together but need some advice, Help ,, its a XC90 2004 T6 ENGINE , modtly the Cam thing ,, i made my own cam locking tool ,, but what is the point of it ,, i mean whe… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
3,610 satisfied customers
Need instructions for Volvo D13 cylinder head installation
May I have the installation instructions for 2009 Volvo D13 head. esn d13*934421* I dont see any alignment guides on head or block.… read more
Dan
Dan
Road Mechanic
763 satisfied customers
Volvo XC90 T6: SO I REPLACED THE HEAD ON A 2003 XC90 T6 AND
SO I REPLACED THE HEAD ON A 2003 XC90 T6 AND NOW I GET MISSFIRES ON 4 AND 5 AND A CODE FORE CAM SENSOR 1. THE COMPRESSION IS GOOD. THE COIL PACKS ARE GOOD THE INJECTORS ARE GOOD AND I REPLACED THE CAM… read more
gonzalesj13
gonzalesj13
55 satisfied customers
hi i have a 2001 volvo v70 2.4T and i need the instructions
hi i have a 2001 volvo v70 2.4T and i need the instructions on how to put back the timing belt , how to adjust the timing belt, and i need to know how to find the notch on the crankshaft and how is ad… read more
Enes
Enes
VOLVO Master Technician
Vocational, Technical or Trade Scho
5,257 satisfied customers
Special: I was hoping for a better solution for my situation, I knew
I was hoping for a better solution for my situation, I knew that I needed a special tool for the job, I just think that someone has done this without it.… read more
volvoexpert1
volvoexpert1
ASE Certified Technician
Bachelor's Degree
1,001 satisfied customers
Volvo S80: i have a problem i took the valve cover out of my
i have a problem i took the valve cover out of my volvo 2.9 s80 2001 and i can not able to put the engine back on time and also have the special tool to put back the camshafts but the crankshaft mark … read more
Enes
Enes
VOLVO Master Technician
Vocational, Technical or Trade Scho
5,257 satisfied customers
Volvo XC90 T6 hello, i just performed a timing belt and water
hello, i just performed a timing belt and water pump job on my 2003 xc90 t6 2.9 awd turbo volvo. i didnt used a cam locking tool and i might had move the gears a bit but the timing marks are dead on b… read more
VWDoc
VWDoc
Owner
Bachelor's Degree
4,972 satisfied customers
05 volvo s40: a B5244S 2.4 liter eng. a/c belt..timing belt..jump
'05 volvo s40 with a B5244S 2.4 liter eng. a/c belt came unraveled, wrapped around the crank pulley, causing the timing belt to jump, bending every valve. parts are replaced, how does one determine th… read more
Enes
Enes
VOLVO Master Technician
Vocational, Technical or Trade Scho
5,257 satisfied customers
2001 Volvo S80: Camshaft..alignment..a 2001 Volvo S80 2.9 Non-Turbo
2001 Volvo S80 Camshaft alignment procedure needed! I'm doing a head job on a 2001 Volvo S80 2.9 Non-Turbo. The head was pretty easy, but the camshafts have to be put in now, & it's a little confusing… read more
Enes
Enes
VOLVO Master Technician
Vocational, Technical or Trade Scho
5,257 satisfied customers
2000 volvo s40: solenoid..timing belt and tensioner..ecm
I have a 2000 volvo s40, I changed exaust cam gear, vvt solenoid cleaned oil pan and pick up installed new oil pan o rings removed and cleaned vave cover passages set timing belt and tensioner correct… read more
Enes
Enes
VOLVO Master Technician
Vocational, Technical or Trade Scho
5,257 satisfied customers
1996 volvo 960: water pump and timing belt on..timing marks set
I have a 1996 volvo 960 that i replaced the water pump and timing belt on. I tried to start the engine with the timing marks set in correctly. Is the engine ruined beyond simple repair?… read more
Doug
Doug
Technician
Vocational, Technical or Trade Scho
8,445 satisfied customers
I need to know how retime the cams with the gears on a 2000
I need to know how retime the cams with the gears on a 2000 Volvo S40. I pulled the head so I pulled the cam gears off of the camshafts. I don't know how they allign because they press on. Thanks… read more
Andy
Andy
Volvo Expert Technician
Vocational, Technical or Trade Scho
3,742 satisfied customers
940 Volvo: Liter..Turbo..The timing belt slips and I dont know if it
Hi, I have a 1993 L4 3.2 Liter Turbo F1 940 Volvo. The timing belt slips and I don't know if it's the belt, the idler pulley or a worn gear. My manual does not have a good diagram for lining up the sp… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
531 satisfied customers
Hello, 91 240 sedan...my preheat hose..Loud pop, then white smoke.
Hello, 91 240 sedan. Driving along in about 90-degree heat, my preheat hose... exploded. Loud pop, then white smoke. Car idles and runs very rough now, and takes longer to start. I've got a replacemen… read more
JamesH
JamesH
Associate Degree
432 satisfied customers
99 V70: timing..Non turbo..cam sprockets off to replace seals
Need to correct timing on 99 V70 Non turbo 2.5l. took cam sprockets off to replace seals and did not mark. When tightening bolts I moved cams before belt back on.… read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,107 satisfied customers
How do I set up the valve timing on a 2000 S40 1.9 T. Problems: 1.
How do I set up the valve timing on a 2000 S40 1.9 T. Problems: 1. When I set mark on oil pump cover between the two marks on crankshaft sprocket it appears to not be at top dead center. 2. The exhaus… read more
Mike, volvo Tech
Mike, volvo Tech
Shop manager,Technician, Foreman
Vocational, Technical or Trade Scho
1,303 satisfied customers
2000 S40: have removed the cam gear from the camshaft..referance
I have a 2000 S40 w/1.9 and have removed the cam gear from the camshaft only to find there are no referance markings, what is the procedure to reference the gears to the cam?… read more
Need4Swede
Need4Swede
Volvo Technician
Vocational, Technical or Trade Scho
154 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

The nearest Volvo dealer is 160 miles away. Best $15 bucks I have spent in a long time!

Paul MCorpus Christi, TX

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Enes

Enes

VOLVO Master Technician

5,257 satisfied customers

18+YEARS WITH VOLVO AS THE MASTER VOLVO MECHANIC&Ase

Andy

Andy

Volvo Expert Technician

3,742 satisfied customers

One of only a handful of ACTUAL Volvo dealership technicians on JA, ASE Master Certified with L1

volvoexpert1

volvoexpert1

ASE Certified Technician

1,001 satisfied customers

Volvo Master Technician with 15 years excusively with Volvos. Also ASE L1certified for over 10 years.

dramey

dramey

ASE Certified Technician

669 satisfied customers

have worked on volvo's for 4 years and am a ase master mechanic. current shop foreman

Chris (aka-Moose)

Chris (aka-Moose)

Technician

578 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

531 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Jim B

Jim B

ASE Certified Technician

504 satisfied customers

40 years Import and domestic AAA Approved Shop owner 30 yrs

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x