Volvo

Have Volvo questions? Ask a Volvo mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Volvo Questions
I have a, 2005 Volvo xc90 im looking for the marks on the
2005 Volvo xc90 im looking for the marks on the cam sprockets to set the timing belt I see the nothes in the cover but don't see on the cams … read more
David Gieswein
David Gieswein
Lead Technician
ASE Master certified
127 satisfied customers
2005 Volvo 2.5t B5254T2 dual VVT. Removed camshaft pulley
2005 Volvo 2.5t B5254T2 dual VVT. Removed camshaft pulley without marking or locking the intakes and exhaust with the tool. I bought the tool now and can't tell the position of the grooves for intake … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
6,440 satisfied customers
2005 volvo v70 2.4 liter non turbo replace the oil pump and
2005 volvo v70 2.4 liter non turbo replace the oil pump and cam seals it has vvt on the intake. Gof it running and got a code p00011. so I advance the crankshaft by 1/8 inch that code went out now I h… read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
37,441 satisfied customers
Volvo v70: , I have a 2001 v70, t5. i have replaced
hello, I have a 2001 v70, t5. i have replaced the head gasket and am trying to install the timing belt. this vehicle has VVT on the exhaust cam and had to be removed. I used the cam lock tool(###) ###… read more
Andy
Andy
Volvo Expert Technician
Vocational, Technical or Trade Scho
3,742 satisfied customers
Volvo V70 X/C AWD: I am doing a head gasket for the first
I am doing a blown head gasket for the first time. I blew it by not photographing the camshafts before cleaning them up. I also took the timing ring off of the exhaust cam during cleaning. I need to s… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
14,652 satisfied customers
Volvo S40 2.4I: hello i recently replaced the head gasket on
hello i recently replaced the head gasket on my brothers volvo s40i with the 2.4 5cyl and i am having timing problems i read in one of the post that intake cam should be above center line and exhaust … read more
Andy
Andy
Volvo Expert Technician
Vocational, Technical or Trade Scho
3,742 satisfied customers
Volvo V70 X/C AWD: My 1999 V70 XC that I just purchased is
My 1999 V70 XC that I just purchased is throwing a check engine code p0014 which indicates the exhaust cam is over advanced. The car runs fine but the code wont clear and in New York State it wont pas… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
3,610 satisfied customers
volvo v70 2.4: two cams line up for the proper alignment on the back
hello I have a volvo v70 2.4 and i'm try to find out how the two cams line up for the proper alignment on the back of the cam do the knoches sideways or up and down… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
3,610 satisfied customers
volvo: timing belt..nut..lines on camshaft or crankshaft to get timing
03 s80 volvo timing is way off took belt a loose but not off and it had to have moved wanted to and set timing and replace timing belt problems are cant get the nut off of harmonic blancer and i do no… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
3,610 satisfied customers
VOLVO S80: NON TURBO..top eng TO CHANGE THE HEAD GASKET, I..INTAKE
ON VOLVO S80 2002 2.9 LT NON TURBO I DISASSMBLY TOP ENG TO CHANGE THE HEAD GASKET, I LOST THE SETTING OF CAM SHAFT INTAKE AND EXHUST,HOW TO NOWTHE POSITION OF CAM SHAFT .THE CRNKSHAFT IS IN THE ALING … read more
Andy
Andy
Volvo Expert Technician
Vocational, Technical or Trade Scho
3,742 satisfied customers
2004 v70: I changed timing belt, tensioner..spark plugs..turbo
Yesterday I changed timing belt, tensioner, serpentine belt and spark plugs on my 2004 v70 turbo 2.5. I started the engine briefly after the timing belt and it seem to run fine. I then changed the spa… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
3,610 satisfied customers
1999 V70: While changing timing belt exhaust cam moved ccw...tensioner
1999 V70 2.4L B2554S engine. While changing timing belt exhaust cam moved ccw. Turned it cw back to correct timing mark, installed belt and adjusted tensioner with no further problems. Turned engine t… read more
Pavlin Koev
Pavlin Koev
Diagnostic Technician
High School or GED
1,069 satisfied customers
2000 s40: sprocket..replaceing cam seal exhaust cam gear..alldata
how do u alian cam sprocket when replaceing cam seal exhaust cam gear model 2000 s40 1.9t have removed cam censor cover already or tex me(NNN) NNN-NNNNthanks i also have alldata for info… read more
Andy
Andy
Volvo Expert Technician
Vocational, Technical or Trade Scho
3,742 satisfied customers
1998 v70: turbo..exhaust..belt or how can I put the shaft
1998 v70 turbo cam timing no mark on the cover for the exhaust geer. How many teeth beatven the gear marks on the belt or how can I put the shaft on the right place.Need info have all the tools.… read more
Andy
Andy
Volvo Expert Technician
Vocational, Technical or Trade Scho
3,742 satisfied customers
1993-volvo-: 850-2-4l-5-cyl-when-cylinder-1-is..cylinder head..cams
Got a follow up for clarification on this Q/A. http://www.justanswer.com/questions/1942n-1993-volvo-850-2-4l-5-cyl-when-cylinder-1-is-at Here's the backstory. I'm having my cylinder head replaced and … read more
Chris
Chris
Volvo Certified EXPERT
Associate Degree
779 satisfied customers
2.4: timing belt..cyl..This is regarding a 1996 850 turbo wagon
How are the cams and crank set up when replacing the timing belt on the 2.4 5 cyl? This is regarding a 1996 850 turbo wagon. Belt is intact, but appears to have jumped time. Engine cranks but does not… read more
Chris
Chris
Volvo Certified EXPERT
Associate Degree
779 satisfied customers
99 V70: timing..Non turbo..cam sprockets off to replace seals
Need to correct timing on 99 V70 Non turbo 2.5l. took cam sprockets off to replace seals and did not mark. When tightening bolts I moved cams before belt back on.… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
17,221 satisfied customers
2000 volvo: turbo..gears..the #1 exhaust cam lobe and intake cam lobe
i have a 2000 volvo turbo c70.. i removed the cam gears from cams and for got to mark them.. does any1 know which way the #1 exhaust cam lobe and intake cam lobe are pointing....… read more
Michael
Michael
Vocational, Technical or Trade Scho
524 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

The nearest Volvo dealer is 160 miles away. Best $15 bucks I have spent in a long time!

Paul MCorpus Christi, TX

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

< Previous | Next >

Meet the Experts:

Enes

Enes

VOLVO Master Technician

5,094 satisfied customers

18+YEARS WITH VOLVO AS THE MASTER VOLVO MECHANIC&Ase

Andy

Andy

Volvo Expert Technician

3,742 satisfied customers

One of only a handful of ACTUAL Volvo dealership technicians on JA, ASE Master Certified with L1

volvoexpert1

volvoexpert1

ASE Certified Technician

1,001 satisfied customers

Volvo Master Technician with 15 years excusively with Volvos. Also ASE L1certified for over 10 years.

dramey

dramey

ASE Certified Technician

669 satisfied customers

have worked on volvo's for 4 years and am a ase master mechanic. current shop foreman

Chris (aka-Moose)

Chris (aka-Moose)

Technician

578 satisfied customers

16 years of experience

Tim Mohr

Tim Mohr

ASE MASTER TECH

531 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Jim B

Jim B

ASE Certified Technician

504 satisfied customers

40 years Import and domestic AAA Approved Shop owner 30 yrs

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x