How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Nathan Your Own Question
Nathan
Nathan, Camera /Video Tech
Category: Camera and Video
Satisfied Customers: 25905
Experience:  Analog and Digital Camera and Video systems expert
59725966
Type Your Camera and Video Question Here...
Nathan is online now
A new question is answered every 9 seconds

Error msg on ESP 3250 - printhead loose or missing, ESP

Customer Question

error msg on ESP 3250 - printhead loose or missing
JA: Just to clarify, what's the exact make and model of your machine?
Customer: ESP 3250
JA: What happened right before this popped up? What troubleshooting have you tried?
Customer: printing stopped in middle of a page. I have tried to fix by removing cartridges and printhead. Cleaning print head.
JA: Anything else you want the camera expert to know before I connect you?
Customer: no
Submitted: 2 months ago.
Category: Camera and Video
Expert:  Nathan replied 2 months ago.

Hi, I'm Nathan.
Sorry to hear that you're having trouble, but I'll do my best to help you. Please give me a few moments to review your details here.

Expert:  Nathan replied 2 months ago.

Unfortunately this symptom indicates a hardware problem,

specifically, it is the result of a bad printhead (or the logic board that controls it).

The head is a "wear item" that fails with age/use. As this is a 2009 model printer, it is well past its 3 year service life, so this type of failure is not surprising.

There is one step you can take here, to clean and reset the system, but it is very unlikely to help. 99.9% of the time, this does come down to a hardware fault. These Kodaks are widely regarded as some of the worst printers ever made, they were very poorly designed and built and have very high failure rates. They were so bad that Kodak nearly went bankrupt supporting all the warranty claims, and stopped making inkjets entirely shortly after this model.

While it can be fixed, it is not worthwhile to do so. You would have to, at a minimum, replace the printhead, which costs about $60, A logic board would run you $200-250. For $80-100 you can replace the entire machine with a brand new model, with current technology and a fresh warranty, which makes more sense than buying the new part for an older printer.

Depending how you'd like to proceed, I can advise on the cleaning/reset steps if you wish to try, help with finding parts, finding a local repair shop, or recommending replacement options for you. Just let me know.

Best regards, ***** ***** for the news,

Nathan

Expert:  Nathan replied 2 months ago.

Hello, it appears your question is still open.

Do you need more help with this?
If so, just reply back on this page. If I’ve answered your question, please let me know you are satisfied, to conclude our session – this is the only way I am credited for my work as an independent technician.

Please note: You have already paid your fee to the site; I'd like to help you and provide value for that fee, but I do need to communicate with you here to do so, if more help is needed.

Nathan