How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, Camera and Video Technician
Category: Camera and Video
Satisfied Customers: 1976
Experience:  25 Years CCTV, CATV, and SMATV setup and installation.
Type Your Camera and Video Question Here...
Dan is online now
A new question is answered every 9 seconds

I've got a Canon 5D mark iii and I took a picture with

Customer Question

I've got a Canon 5D mark iii and I took a picture with an iso of 2000 and the picture is very unclear is there anything I can do on the camera to change the iso setting? Once the picture has been taken?
Submitted: 2 years ago.
Category: Camera and Video
Expert:  Dan replied 2 years ago.
Hello and thank you for your question, I would be happy to assist you today! No there is nothing you can do with the photo from the camera side. You may be able to clean it up a bit by using a photo editing program. You may also want to consider shooting in RAW format which will give you greater editing capabilities after the photo is taken.
Customer: replied 2 years ago.
Well I did take it in raw as well and I know I can clean it up on a photo editing programme but it is still not sharp!
Expert:  Dan replied 2 years ago.
Is this the only photo you have had a problem with?
Customer: replied 2 years ago.
No I took the whole photoshoot session on a high iso! It was a real mistake I just wasn't thinking and now I am devastated at the results and wishing there is something to do on camera with it!
Editing on the computer I know how to... I'm hoping for some better technique
Expert:  Dan replied 2 years ago.
Maybe I misunderstood your question? Were you asking if you could change the ISO on the photo after it was taken?
Expert:  Dan replied 2 years ago.
No I'm very sorry, but once you have the camera settings at what you want, there isn't much you can do other than edit the photo from a computer.
Customer: replied 2 years ago.
Customer: replied 2 years ago.
Is the best way to do it using Adobe photoshop?
Expert:  Dan replied 2 years ago.
Do you already have it?
Expert:  Dan replied 2 years ago.
Adobe would be my first choice, but if you don't already have it, there is a free program that is almost as powerful.
Expert:  Dan replied 2 years ago.
Still with me?
Expert:  Dan replied 2 years ago.
Here is the LINK for the free photo editing software. Get back to me when you can or if you have further questions.
Customer: replied 2 years ago.
I have Adobe
Expert:  Dan replied 2 years ago.
Photoshop should do the job then.