How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Hannigan Your Own Question
Michael Hannigan
Michael Hannigan, Camera and Video Technician
Category: Camera and Video
Satisfied Customers: 11697
Experience:  25+ Years Experience in Computers and Electronics
Type Your Camera and Video Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

I rest the pentax epk 1000 initalize button and now can't capture

Customer Question

I rest the pentax epk 1000 initalize button and now can't capture pictures from the scope and all prior set is gone. How do I get back to my previous settings?
Submitted: 2 years ago.
Category: Camera and Video
Expert:  Michael Hannigan replied 2 years ago.
Hello. My name is***** will be your Primary Care Technician and I can assist you with your question. Following other resets that you can do on the EPK 1000
Reset the lamp status indicator.
Once the new lamp module installed, reset
the state of the indicator lamp on the front panel of the processor.
* Connect the power cord into the electrical outlet
and turn the unit on.
* Hold down the "Ctrl" and "Alt" and
Press the "Timer" (Stopwatch) button
menu to display the "Lamp counter"
(Lamp meter set) on the screen.
* Press the arrow keys up / down to move
the cursor to "Clear Lamp" button
(Lamp Reset) and press Enter.
Press ESC to exit "Counter menu
Lamp "(Lamp meter set).
* Turn the power switch OFF (0), then
again press the switch. confirm that
the LED on the status of the lamp indicator is green.