How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Your Own Question
Brian, Plumber
Category: UK Plumbing
Satisfied Customers: 848
Experience:  16 yrs. experience as plumber, including full bathroom and kitchen installations.
Type Your UK Plumbing Question Here...
Brian is online now
A new question is answered every 9 seconds

I have a problem with my EcoTec boiler Alex

Customer Question

I have a problem with my Valiant EcoTec boiler
Submitted: 1 year ago.
Category: UK Plumbing
Expert:  Brian replied 1 year ago.

S.30 is no heat demand from external source. The remote device has quite possibly lost its connection due to the power cut and could need re-pairing.

Sometimes the reciever has an override button you could try this to see if you get some response from your boiler

Customer: replied 1 year ago.
ok thanks. does it need an engineer to do the re-pairing?
Expert:  Brian replied 1 year ago.

no shouldnt do you will need the instructions for the programmer which should have all the directions required.

Does the receiver have an override by the way?