How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty
Marty, European Car Expert
Category: UK Car
Satisfied Customers: 407
Experience:  ASE & Bosch Certified Master Tech. Over 30 years experience.
13230946
Type Your UK Car Question Here...
Marty is online now
A new question is answered every 9 seconds

I have the Mercedes W220 S 430. It does not start the

Customer Question

Hello, I have the Mercedes W220 S 430. It does not start the engine.
The car was about 14 days without a battery. After the new starter is purchased, it rotates the engine but does not start. Only the P1605 error code is displayed on the original diagnostics.
The actuators indicate: Engine control blocked - Yes
how should I proceed to unlock the engine control unit?
Thanks for every advice.
Yours sincerely, Radek
JA: Have you checked the battery, particularly the terminal connections? Are they corroded?
Customer: Yes
JA: What year is your 430?
Customer: 2000
JA: Are you fixing your 430 yourself? What have you tried so far?
Customer: Ano, funkci svíčky, nedáví jiskru, výměna senzoru kliky a vačky
JA: Anything else you want the mechanic to know before I connect you?
Customer: Auto je na LPG
Submitted: 30 days ago.
Category: UK Car
Expert:  Chad Farhat replied 30 days ago.

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Expert:  Chad Farhat replied 30 days ago.

Hey how are you

have you tried A master reset , what scanner you have

Master reset Procedure

1- Disconnect Battery Cables ( Negative & Positive Cables )you can use any electrical wire as an extension if battery cables don't reach .

2- Hold cables Together for 60 secs ,then let go

3- Wait 30 minutes

4- Make sure all doors are closed

5- Reconnect battery Cables

6- Lock & unlock the vehicles using the key from driver door side (if you have a key fob with no blade key, just lock & unlock using the key fob buttons)

7- Enter the vehicle and attempt to start

Please let me know

Thank You

Chad Farhat

ASE Certified Technician