How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: UK Car
Satisfied Customers: 22676
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your UK Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I'm getting fault codes: TCM-002E Lock--up function, jerks

Customer Question

I'm getting fault codes:
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: TCM-002E Lock--up function, jerks or does not engage and
JA: What is the model/year of your Volvo?
Customer: TCM-0212 Shift solenoid S, Hydraulic fault Have reset but comes back on a few meters down the road
JA: What year is your Volvo?
Customer: 2007 C30 2.5 VIN: YV1MK685972023818
JA: Are you fixing your C30 yourself? What have you tried so far?
Customer: Took it to a mechanic who read and cleared the faults
JA: Anything else you want the mechanic to know before I connect you?
Customer: I dont think its had a gearbox oil change in a while
Submitted: 8 months ago.
Category: UK Car
Expert:  sprinkles08 replied 8 months ago.

Hello and welcome to JustAnswer!

Both of these codes most likely point to transmission failure if the fluid is full.

What symptoms are you experiencing?

Has the fluid level and condition been checked?