How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Martin Your Own Question
Martin, auto electrical
Category: UK Car
Satisfied Customers: 760
Experience:  South African Trade Diploma in Auto Electrical
Type Your UK Car Question Here...
Martin is online now
A new question is answered every 9 seconds

I have vw1600 twin port motor which i want to replace the

Customer Question

JA: Hello. What seems to be the problem?
Customer: I have vw1600 twin port motor which i want to replace the old distributor with a new Bruck electronic unit, only problem it has three wires coming out the unit a black neg marked , a green marked buy only a 0 symbol and a red positive marked wire. Where does the green wire go?
JA: Have you checked all the fuses? Do you have a wiring diagram?
Customer: No too both, i have a white positive wire to my coil + and two wires from there to carb choke and electronic jet. one wire from my condensor to neg and one other wire to to theneg of the condenser
JA: What is the model/year of your VW?
Customer: 79 which has been converted into a trike
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: yes was running fine with an occasional slight miss, my old distributor shaft is worn
JA: Anything else you want the mechanic to know before I connect you?
Customer: yes this new distributor still has a advance / retard unit but no condensor, where does the third wire marked with symbol 0 connect to
Submitted: 9 months ago.
Category: UK Car
Expert:  Martin replied 9 months ago.

Hello, Welcome to Just Answer.

The green wire connect to the terminal marked no:1 on the ignition coil.

The other wire red wire go to the positive or no: 15 on the ignition coil .

The black wire must be grounded to the engine.

This should answer your question should you need more information please do not hesitate to ask.



Related UK Car Questions