How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: UK Car
Satisfied Customers: 22830
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
Type Your UK Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Trying to find valve clearences ford 3.0 tdci we engine,

Customer Question

trying to find valve clearences ford 3.0 tdci we engine
JA: How many miles are on the car? Have you noticed any leaks lately?
Customer: 90.000 and no
JA: What is the model of your '90 Ford?
Customer: ranger 2008
JA: Are you fixing your Ranger yourself? What have you tried so far?
Customer: just changed head just looking for valve caearences
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 11 months ago.
Category: UK Car
Expert:  Kevin Bourcier replied 11 months ago.

hello What exactly do you want to do ? are you wanting to adjust the valve lash on your engine ?

Customer: replied 11 months ago.
just changed head all ok just need to do lash
Expert:  Kevin Bourcier replied 11 months ago.

this is a north american 3.0 liter in a ford Ranger ?

Customer: replied 11 months ago.
its an euopean 3.0 tdci 16 valve
Expert:  Kevin Bourcier replied 11 months ago.

okay . I am sorry on my end it did not specify that . I am in Canada and do not think I have that data . I will opt out . I will continue to look for what you are asking for and come back to you if I find it . In the mean time I will open this up to other experts that may be able to help you . Thanks , Kevin .

Expert:  sprinkles08 replied 11 months ago.

Hello and welcome to JustAnswer!

The valve clearances on a cold engine should be .10-.16mm for intake, .17-.23mm for exhaust.

Engine specifications

Related UK Car Questions