How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Technicaldan Your Own Question
Technicaldan, UK Car Mechanic
Category: UK Car
Satisfied Customers: 112
Experience:  Accredited
Type Your UK Car Question Here...
Technicaldan is online now
A new question is answered every 9 seconds

JA: . What do you want help with? Customer: I have mercury

Customer Question

JA: Hi. What do you want help with?
Customer: I have mercury 100 hp efi 2006 model and on 2800 rpm starting beep alarm but we chekket oil pressure is 1,5 is it normal pressuse
JA: How old is your oil pump? Has the check engine light come on?
Customer: yes light come on . I dont know how old is .
JA: Are you hoping to fix this yourself?
Customer: yes
JA: Great! What have you tried so far?
Customer: just oil pressure
JA: Is there anything else important you think the Mercury Mechanic should know about your Mercury?
Customer: i saw more feil on this engine . propeller is mowing abaut 4 mm ,
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Mercury Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: UK Car
Customer: replied 1 year ago.
hvat oil pressure must be on this engine?
Expert:  Technicaldan replied 1 year ago.
If it's 1.5 psi than it sounds far too low, 1.5 bar isn't brilliant at 2800 rpm either, need to know the unit of measurement.If it's a beeping tone as opposed to a solid alarm than it is an oil alarm.I've been reading, 70 psi (4.8 bar) at idle - 1800 rpm with cold thick oil is apparently normal for the 115 versions, I would expect yours to be similar.Would be worth checking the oil level, filter condition, oil pressure relief valve (could be dumping pressure), then thinking about the pick up being blocked or the pump on the way out.
Expert:  Technicaldan replied 1 year ago.
Hope you get it sorted.