How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty, European Car Expert
Category: UK Car
Satisfied Customers: 404
Experience:  ASE & Bosch Certified Master Tech. Over 30 years experience.
Type Your UK Car Question Here...
Marty is online now
A new question is answered every 9 seconds

I have a 99 f250 7.3l that wont start, I have change ipr ipc

Customer Question

Hello I have a 99 f250 7.3l that wont start, I have change ipr ipc idm but no start. What can it be?
Submitted: 1 year ago.
Category: UK Car
Customer: replied 1 year ago.
I ran down the road, and the check engine light flash then the engine drop on rpm. I get home. It fired up the next day but no power, but the next Day no start.
Expert:  roybelding replied 1 year ago.

good morning my name is ***** ***** I will assist

2 things come to mind.

1. high pressure oil pump. the engine needs around 700 lbs of pressure to start. this can be checked with a scan tool.

2. ficm or fuel injector control module. this is a common failure and once again needs to be verified with a scan tool to see if any signal is being sent to the injectors to fire