How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Car Enthusiast
Category: UK Car
Satisfied Customers: 28246
Experience:  Over 17 years experience diagnosing and repairing automobiles.
Type Your UK Car Question Here...
Pete is online now
A new question is answered every 9 seconds

I received codes 4560, 4570 & 4610 When you speed it goes

Customer Question

I received codes 4560, 4570 & 4610
When you speed it goes into limp mode
Submitted: 1 year ago.
Category: UK Car
Expert:  Pete replied 1 year ago.

My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

The codes you have here are:

4560 Pressure Sensor - Plausibility - Pressure too Low
4570 Pressure not Plausible
4610 Rail pressure control valve adaptation

This can be caused by a faulty fuel pressure rail sensor (most common) or an issue with the rail pressure control valve or the fuel injection pump itself.In most cases the sensor is the cause needing replaced as it can send false pressure signals.This will need to be tested further to locate and correct this fault here and will require some special dealer or authorized repair center test equipment to do this testing.

Thanks Pete