How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin Your Own Question
Kevin, UK Car Mechanic
Category: UK Car
Satisfied Customers: 2029
Experience:  Diagnostic technician at vw /audi specialist
Type Your UK Car Question Here...
Kevin is online now
A new question is answered every 9 seconds

Mk7 2.2fwd: 2.2fwdtransit Mk 7. I have fitted recon turbo and

Customer Question

2.2fwdtransit Mk 7. I have fitted recon turbo and actuator. The map sensor is saying map pressure is higher than expected.
Submitted: 2 years ago.
Category: UK Car
Expert:  Kevin replied 2 years ago.
Hi I'm Kevin if pressure is higher than expected this can only be caused by incorrect actuator position on turbo where did turbo cone from
Customer: replied 2 years ago.
Cr turbos .New Milton Hampshire.
Expert:  Kevin replied 2 years ago.
What was the original reason for turbo change ? I'm assuming fault wasn't present before ?
Customer: replied 2 years ago.
Engine management light on. Diognostics was turbo and map pressures high. now it is only map pressure high.
Expert:  Kevin replied 2 years ago.
Ok have you have software checked to see if there are any PCM updates available
Customer: replied 2 years ago.
I did, but not by a ford dealer. I may go and see the turbo people first as it is under warranty.
Expert:  Kevin replied 2 years ago.
Deffinatly get software checked at ford as there are so many updates for the mk 7 . I would also have erg movement checked to make sure it is opening as this may cause the same type of fault

Related UK Car Questions