How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Peter Zavarelli Your Own Question
Peter Zavarelli
Peter Zavarelli,
Category: UK Car
Satisfied Customers: 28717
Experience:  Technical Consultant at Just Answer
Type Your UK Car Question Here...
Peter Zavarelli is online now
A new question is answered every 9 seconds

Ford Focus LX: I have problem with 1.8 kkda focus

Customer Question

I have problem with 1.8 kkda focus deosnt start flashing glow plug icon.with relays clickin in engine fuse box. Faults P0560, p1632, and camshaft sensor signal...cant remember code number however Cranking engine and has 240 endine rpm. I disconected egr cleared faults...all gone but is showing p0490 I think so egr signal obiously cause egr disconnected, but no cliking no flashing glow plug icon all seams to be ok....ones cranking faults come back but only p1632 and p0560..electrical problem....I have 2 sets of pcm ecu, bsi, and instrument cluster as was no connection between ecu and icluster that was reason for start to repairing car...finally found broken wire in harness. Now this problem coming
Submitted: 2 years ago.
Category: UK Car
Expert:  Peter Zavarelli replied 2 years ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
My info is limited on your model here but I see no one else has responded and thought I would see if I can help here.
Since you did find a broken wire in the wiring harness re inspect the engine wiring harness for any other broken wiring needing repaired.If a broken wire is found or several wires found broken the affected wiring will need repaired to correct this here.
In some cases wiggling the engine wiring harness will help locate the fault.
Thanks Pete