How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Peter Zavarelli Your Own Question
Peter Zavarelli
Peter Zavarelli,
Category: UK Car
Satisfied Customers: 29085
Experience:  Technical Consultant at Just Answer
14928985
Type Your UK Car Question Here...
Peter Zavarelli is online now
A new question is answered every 9 seconds

I have a chrysler voyager 2004 2.8 auto no reverse on computer

Customer Question

i have a chrysler voyager 2004 2.8 auto no reverse on computer says reverse but no drive ?
Submitted: 2 years ago.
Category: UK Car
Expert:  Peter Zavarelli replied 2 years ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
If your computers data is showing reverse is selected but you have no reverse this and you have drive but your computer/scan tool data is not showing the selection in drive this can be due to an internal electrical fault with the transmission position/range sensor itself.On some models this is called the neutral safety switch.I have also seen internal transmission issues with the transmission valve body in some cases cause this as well.
This will need to be checked over/tested further to pinpoint the cause here and then repaired once located.
Thanks Pete