How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask G Garage Your Own Question
G Garage
G Garage, UK Car Mechanic
Category: UK Car
Satisfied Customers: 12
Experience:  MOT Tester, Vehicle Technician. Over 20 yrs experience
Type Your UK Car Question Here...
G Garage is online now
A new question is answered every 9 seconds

hi i am working on a rover 75 2.0 was towed ...

Resolved Question:

hi i am working on a rover 75 2.0 was towed in (non-runner)and i plugged in the scanner. it came up with 3 faults that wont clear.1.P1E00 can-bus. 2.P3505 glow system. fuel pressure monitoring. none of these codes are coming up in thediagnostics trouble codes book. has anyone any ideas(there are no rover specialists near)
Submitted: 9 years ago.
Category: UK Car
Expert:  G Garage replied 9 years ago.

P1260 is related to the low-pressure (fuel priming) system.

Do you hear the pump run when turning ignition on ?

Check in-tank & (under-bonnet, if fitted) pump(s).


G Garage and 4 other UK Car Specialists are ready to help you
Customer: replied 9 years ago.
Reply to G Garage's Post: hi i had already checked & the pumps weren't running. i bridged the fuel pump relay & the pumps both ran but the car still would not fire but the same codes appeared on the scannerafter i cleared them. Is it poss that it could be related to the high press.pump

Related UK Car Questions