How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Webb-Guy Your Own Question
Webb-Guy
Webb-Guy, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 1992
Experience:  maitenance tech at casto
95800582
Type Your UK Appliance Question Here...
Webb-Guy is online now
A new question is answered every 9 seconds

Maybe you can help me. I have a whirlpool 7560/1, 2009, Yes,

Customer Question

Hi - maybe you can help me. I have a whirlpool 7560/1
JA: Can you guesstimate how old your Whirlpool is? And just to clarify, what's the exact model?
Customer: 2009
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: Beeps contoniusly at end of program - runned diag now - still stops programs - no error code - just beeps - dont stop beeping
Submitted: 1 year ago.
Category: UK Appliance
Customer: replied 1 year ago.
Water is pumped out - no other indication of problems - Normaly the machine will beep - 3 times maybe in end of program - now its just beep beep beep ( 2-3 second interval) until you switch off .
Expert:  Webb-Guy replied 1 year ago.

Hello and welcome to Just answer. My name is ***** ***** I will be the one to try and assist you today. Are there any lights flashing during the beeping?

Customer: replied 1 year ago.
Hi- No lights flashing
Expert:  Webb-Guy replied 1 year ago.

Ok so what is your model number so I can pull your unit up?

Customer: replied 1 year ago.
MoD numb
Customer: replied 1 year ago.
Customer: replied 1 year ago.
Expert:  Webb-Guy replied 1 year ago.

Take the left hand panel off and at the bottom of the water matrix you'll see two wires going to a reed switch. Pull the plug off, push it back on and try the machine again.

Expert:  Webb-Guy replied 1 year ago.

I was wondering how it was going?

Customer: replied 1 year ago.
Hi,
I am sorry for late reply. Actually - before you answered me to remove anything ,I reomved the power on the machine. Then I started a Diagostic test. Again. For some reason . the machine went through ful cycle - and now it does not beep for long time any more - just the normal stop beep's. I dont know if it could be power cycle or the dia cycle . but someting changed.
For now I thank you . the machine can be used - thx
Expert:  Webb-Guy replied 1 year ago.

I do understand well in the event the problem comes back just reach out to me here.

Customer: replied 12 months ago.
Thank you ��
Expert:  Webb-Guy replied 12 months ago.

You are very welcome