How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 22029
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a Teka LP1 800S dishwasher that wont power up. Power

Customer Question

HI I have a Teka LP1 800S dishwasher that wont power up. Power buton beeps though when you press it, but no lights and no function.
JA: Just to clarify, what's the make and model of your dishwasher? And have you run a diagnostic test cycle?
Customer: Teka LP1 800S and no I haven't run a test cycle
JA: Do you plan on doing the work yourself?
Customer: if possible
JA: Anything else we should know to help you best?
Customer: I'm in Spain
Submitted: 12 months ago.
Category: UK Appliance
Expert:  Kelly replied 11 months ago.

Hi, welcome to Just Answer. Sorry to hear you are having appliance trouble, I know how frustrating that can be! My name is ***** ***** I look forward to helping you!

If it is beeping, the most likely to be at fault is the main electronic controller. Turn the power off at the mains for at least 4 hours to allow a full discharge and reset of the electronics. Any change after it is powered back up?