How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 22027
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

My zanussi zwf1432s is jumping from wash to drain then

Customer Question

Hi my zanussi zwf1432s is jumping from wash to drain then stopping. I put in just 2 towels with no detergent and it went through the whole cycle. When I tried a load again it jumped again from wash to drain. I had to reset and skip to rinse where it then jumped to drain where I then reset again and skipped to spin before it went to the end. Any ideas?
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you!

Please know that I am not compensated for my time by the site until you rate using the stars at the top of your page. A rating is appreciated once we get to the solution for your appliance issue, thanks!

It sounds like the machine controller may have issues. Unplug for a few hours to reset the controls. Any change when plugged back in?

Customer: replied 1 year ago.
Customer: replied 1 year ago.
Expert:  Kelly replied 1 year ago.

If you remove the main top from the machine, the pressure switch is mounted at the top of the cabinet. It will have a very small hose attached to it. If you remove that hose and blow through it (the hose), does air easily pass?