How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 22247
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a bosch LogicXX tumble dryer, which is only heating

Customer Question

HI Pearl, I have a bosch LogicXX tumble dryer, which is only heating intermittently on low heat, despite having a new heater element and thermostat bundle just installed
JA: Can you guesstimate how old your Bosch is? And just to clarify, what's the exact model?
Customer: It is 6 or 7 years old
JA: Do you plan on doing the work yourself?
Customer: if possible yes
JA: Anything else we should know to help you best?
Customer: have replaced the heater element
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Appliance Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you!

Please know that I am not compensated for my time by the site until you rate using the stars at the top of your page. A rating is appreciated once we get to the solution for your appliance issue, thanks!

I suspect there may be an issue with the air flow that is causing the element to short cycle due to an overheat situation. When was the last time the machine was disassembled and cleaned out inside?

May I please have your model number so I am able to provide you with accurate, model specific information?