How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 16083
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel is online now
A new question is answered every 9 seconds

Just replaced heating element on zanussi de6754 dishwasher

Customer Question

Just replaced heating element on zanussi de6754 dishwasher but still not heating the water
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Daniel replied 1 year ago.

Hi

If the dishwasher isn't heating and the heater has been replaced then its going to be the main control board at fault.

As to be honest on these dishwashers when they don't heat most of the time its actually the control board that causes this fault here.

What you can try is remove the plastic control panel and from there you will see the control board.

Remove this and open the plastic casing and remove the board from there.

Inspect the board and you may see a dry joint/ Burn mark on the heater relay. If so then if you have a soldering iron you can resolder it and that cures it from there.

Failing that you will need to replace the control board from there and that will get it heating again from there.

If you need anymore info just get back to me.

Regards