How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 15969
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your UK Appliance Question Here...
Daniel is online now
A new question is answered every 9 seconds

My AEG washer/dryer is suddenly displaying a E10 code and

Customer Question

My AEG washer/dryer is suddenly displaying a E10 code and the dryer function is not working
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Daniel replied 1 year ago.


Sorry for the delay in getting to your question, Do you still need help on this?

If so then is the error code only comming up on the dryer side?

Is the wash side ok still?


Customer: replied 1 year ago.
only on the dryer side. Wash is fine
Expert:  Daniel replied 1 year ago.


Ok in this case the water inlet valve will be the fault here.

What you need to do is remove the plug and then remvoe the top of the washer.

From there look in the back left corner and you will see the water inlet valve.

On there you will see a green coil. This is for the dryer side. You need a multi meter and test the green coil and see if faulty. It should read about 3.6K ohms. If faulty then you need to replace the water valve and this will get the dryer side back up and running again.

Check that and see what you find but from the fault you descibe this will be the water inlet valve there as the dryer coil on it fails alot on these.

If you need anymore info just get back to me.