How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 3409
Experience:  20 yrs. experience with a major worldwide manufacturer.
Type Your UK Appliance Question Here...
Rob is online now
A new question is answered every 9 seconds

I have a hotpoint WMUD942 that has displayed fault F05. We

Customer Question

I have a hotpoint WMUD942 that has displayed fault F05. We have drained it and removed the debris from pump. Turned it off at the wall and back on again and now the machine is displaying the same code again. I'm sure theres nothing in it anymore, is there any way of resetting it? thanks
Submitted: 2 years ago.
Category: UK Appliance
Expert:  Daniel replied 2 years ago.


Sorry for the delay in getting to your question, Do you still need help on this?

If so then when you set it going on a spin only cycle can you hear the pump running?

If not then is there a slight humming noise comming from the pump?