How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 22849
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I've got a cyclonic twin clean. I've just tried to clean

Customer Question

Hi I've got a cyclonic twin clean. I've just tried to clean the filters by turning them as the red light is flashing and nothing happens
Submitted: 2 years ago.
Category: UK Appliance
Expert:  Kelly replied 2 years ago.
Hi, my name is ***** ***** I look forward to helping you! There are several things that can cause the issue you are having. It is near impossible to tell for certain what has happened. I would recommend professional repair for this problem or you will likely spend a great deal of money on guessing at which part may be faulty.
EC-LED always indicate (flashing) clogged filters, even when they are
Possible reasons and solutions:
1 Check that the air tubes to the pressure switch on the
switchboard is properly connected and works.
2 Switch is broken, change switchboard.
4 LED is broken, change display board.
3 The switch works, processor doesn't sense the switching
properly - change processor board.