How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 15981
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your UK Appliance Question Here...
Daniel is online now
A new question is answered every 9 seconds

Ihave a hotpoint wd420 on/off led flashing fast and the

Customer Question

Hi ihave a hotpoint wd420 on/off led flashing fast and the reduced creases led flashing slowly this is the seconded led light down from top. Any clues regards Gary
Submitted: 2 years ago.
Category: UK Appliance
Expert:  Daniel replied 2 years ago.
Hi If you have light 2 flashing and the on/off light this is F04 error code which means pressure switch stuck on empty. Basically its a filling issue. First check the water supply to the washer is fine and the pressure is good.If that's fine and it is filling with water then remove the top and you will see the pressure switch in the back left corner.Going to the bottom of the pressure switch. Remove the hose and blow hard down it and then inspect the hose for any holes.If that's fine then refit the hose and retry the washer and see how it goes from there and let me know. But the error code you have is a filling problem here. Regards