How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 16385
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your UK Appliance Question Here...
Daniel is online now
A new question is answered every 9 seconds

Have problem with Indesit WIDL126s. When switched on at plug

Customer Question

Have problem with Indesit WIDL126s. When switched on at plug machine makes a buzzing sound regardless of whether machine is switched on or off. When machine is switched on LED NUMBERS 1&2 flash but machine does nothing.
Submitted: 2 years ago.
Category: UK Appliance
Expert:  Daniel replied 2 years ago.
Hi Lights 1 and 2 flashing is a communication fault between the front control board and the main control board at the back at the bottom. But try this and see what happens.Unplug the washer and remove the top.Look behind the front plastic control panel and you will see a small wiring block going to the front control board. Disconnect this and give the ends a gentle squees and refit it and turn it back on and see if this cures the fault from there. If it doesn't then check for any corrosion on the wiring block and the front board. If so then that needs to be replaced. But if that looks all ok then im afraid the main control board at the back at the bottom will be the issue here and will need to be replaced. Try that above and see what happens and let me know. Regards