UK Appliance
UK appliance repair questions? Ask a technician for answers ASAP
Connect one-on-one with {0} who will answer your question
Question Summary
I have a Zanussi jetsystem 1200 XC.It is stopping 2 minutes into its synthetics programme of 1hour 21 minutes and is showing E10.What does this mean and what can I do about it?Answer Summary
The fault code is indicating that no water intake is being detected during the drying cycle. At the rear of the dispenser is a square shaped cover. Water should come out of the tube exposed.
Answered in 19 minutes by:
12/27/2014
AppTech8579, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 2,096
Experience: worked on appliances for around 15 years
VerifiedThe fault code is indicating that no water intake is being detected during the drying cycle.
Unplug the appliance and take the top off. At the rear of the dispenser is a square shaped cover. Take the cover off. Plug the machine in and try again. Water should come out of the tube exposed.
If no water, then the most likely fault is the triple valve has failed on the dryer inlet. Replace the cover. Replace the triple valve and try the machine again.
Unplug the appliance and take the top off. At the rear of the dispenser is a square shaped cover. Take the cover off. Plug the machine in and try again. Water should come out of the tube exposed.
If no water, then the most likely fault is the triple valve has failed on the dryer inlet. Replace the cover. Replace the triple valve and try the machine again.
AppTech8579, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 2,096
Experience: worked on appliances for around 15 years
VerifiedAppTech8579 and 87 other UK Appliance Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with an uk appliance technicianLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related UK Appliance Questions
My Zanussi jetsystem 1200 XC has flooded the floor! Floors
My Zanussi jetsystem 1200 XC has flooded the floor! … read more
eddie22Island
Home Improvement Contractor and Repairs
High School or GED
2,945 satisfied customers
I have a zanussi jetsystem 1200 and it stops mid cycle. We
I have a zanussi jetsystem 1200 and it stops mid cycle. We have drained it but it works for 2 minutes then stops mid cycle. It's stopped at 5 minutes at the moment… read more
Kelly
Owner/Technician
High School or GED
32,685 satisfied customers
I have inherited a Zanussi Jetsystem 1200 TurboDry XC, moddel
I have inherited a Zanussi Jetsystem 1200 TurboDry XC, moddel WJS1265W, product number XXXXXXXXX 00, type P6247670. The door clicks repeatedly when I switch the machine on, sounds as if it fails to lo… read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
the door on my Zanussi washer dryer (Jetsystem 1200 XC - model
the door on my Zanussi washer dryer (Jetsystem 1200 XC - model number WJD1257W) will not shut - it seems to be aligned correctly but the catch will not engage when the door is pressed shut. The machin… read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
Our Zanussi Jetsystem 1200 XC washing machine is not going
Our Zanussi Jetsystem 1200 XC washing machine is not going through the wash programme. It fills and will drain but the drum is not spinning. I have checked the belt and this is okay and the clock seem… read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
Hello, my Zanussi Jetsystem 1200 wont do anything when I start
Hello, my Zanussi Jetsystem 1200 won't do anything when I start either a washer or dryer programme, everything seems to be connected properly, when I take off the inlet hose water flows out but nothin… read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
Just about to fit a new belt on a Zanussi jetsystem 1200 XC
Just about to fit a new belt on a Zanussi jetsystem 1200 XC should be OK with that but just rotated the drum and it's loose and wobbling about could you tell me what the problem is likely to be and ho… read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
Zanussi jetsystem 1200 xc model no FJ 1254 W Right hand
Zanussi jetsystem 1200 xc model no FJ 1254 W Right hand column lights 2, 4 & 7 flashing. What does this error code mean? Thanks. The machine stops midway thru a cycle. If you power off and then power … read more
Techdesk
Service Engineer
High School or GED
15,402 satisfied customers
Our Zanussi Jetsystem 1200 XC washing machine is putting up
Our Zanussi Jetsystem 1200 XC washing machine is putting up an error message, E00. What does this mean?… read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
I have a zanussi Jetsystem 1200 xc model no. WJD 1257W and
I have a zanussi Jetsystem 1200 xc model no. WJD 1257W and the conditioner section does not empty. Please could you tell me why and what the problem might be. It has been happening the last 10 washed … read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
My Zanussi Jetsystem 1200 XC is jammed on. The dryer cycle
My Zanussi Jetsystem 1200 XC is jammed on. The dryer cycle has been selected for 40 mins. It keeps giving the E10 error code, but when I try to select the skip option button, nothing happens and the p… read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
Hi I have XC 1200 aquacycle and I didnt pump out the water.
Hi I have XC 1200 aquacycle and I didnt pump out the water. I checked the pump and drain and it all seems clear. Now when I start a new cycle its flushes in water for about 2 sec's and just stops. Ple… read more
Daniel
Home Appliance Technician
High School or GED
15,970 satisfied customers
Hi I have a Zanussi JetSystem 1200 washing machine witch will
Hi I have a Zanussi JetSystem 1200 washing machine witch will not turn the drum it goes through the program filling up and emptying but motor will not turn then programmer goes onto next program with … read more
Techdesk
Service Engineer
High School or GED
15,402 satisfied customers
i have a zanussi jetsystem 1200 xc (fjr1254w) and its showing
i have a zanussi jetsystem 1200 xc (fjr1254w) and its showing e90 on the screen what does that mean… read more
Techdesk
Service Engineer
High School or GED
15,402 satisfied customers
Have a zanussi Jetsystem 1000 XC fjs1025w every time i close
Have a zanussi Jetsystem 1000 XC fjs1025w every time i close door and switch it on E40 appears on the screen...some times it works and mostly not...what does E40 mean.?… read more
Techdesk
Service Engineer
High School or GED
15,402 satisfied customers
Hi I have a Zanussi JetSystem 1200 washing machine that has
Hi I have a Zanussi JetSystem 1200 washing machine that has started to 'stick' part way into its cycle. I have tried power cycling it a few times but with no luck. It's currently stuck with the door l… read more
Techdesk
Service Engineer
High School or GED
15,402 satisfied customers
Zanussi Jet System 1200 XC - power light and door light on
Zanussi Jet System 1200 XC - power light and door light on but door will not open and no programme will register… read more
Techdesk
Service Engineer
High School or GED
15,402 satisfied customers
Hi, We have a Zanussi Jetsystem Turbodry 1200 XC. The control
Hi, We have a Zanussi Jetsystem Turbodry 1200 XC. The control panel is jammed on Tumble-dry and refuses to skip/reset to allow us to use other programs.… read more
The Famous Forry
High School or GED
615 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.
Bagley, IA
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!
Los Angeles, CA
Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.
Hesperia, CA
I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.
Kernersville, NC
Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.
Woodstock, NY
Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.
Elkton, Maryland
< Previous | Next >
Meet the Experts:
Rob
Home Appliance Technician
3,409 satisfied customers
20 yrs. experience with a major worldwide manufacturer.
Drcool
Home Appliance Technician
502 satisfied customers
i am an expert in the Home Appliance category in the US. been in the field for more than 30 years.
Tyler Z.
Appliance Doc
210 satisfied customers
I have worked in the appliance industry ever since graduating from college.
Appliance Tech-Care
Appliance Technician
210 satisfied customers
35+ Yrs Experience - 40,000+ 'Real World' Repairs
The Home Smithy
Appliance repairman
91 satisfied customers
Appliance repairman
Daniel
Home Appliance Technician
15,970 satisfied customers
30+yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
AppTech8579
Home Appliance Technician
2,096 satisfied customers
worked on appliances for around 15 years
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
