How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 22583
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

Bosch classixx 1200 s express

This answer was rated:

Bosch classixx 1200 s express , inside door number E-NR.WAE2416SGB. FD8804.
Machine will not switch on, 1200, 800 and rinse hold lights are flashing
Read the manual and see it is a motor fault. Will buy a new machine. No need to reply.
Hi, my name is XXXXX XXXXX I look forward to helping you! That is indeed a motor issue but one that will likely be corrected by replacing the carbon brushes, a very inexpensive repair! The brushes you need are pictured and available below.


Carbon Brush Kit <----- CLICK HERE FOR THE CORRECT PART FOR YOUR MODEL

sparepart
Customer: replied 4 years ago.
thanks, How easy is it to install these?
It is very easy, only needing to remove the retaining bracket and disconnect the connectors.
Customer: replied 4 years ago.
Thanks, XXXXX XXXXX give that a shot, will the machine go back to normal or will it need reset?
Just unplug it when you replace the brushes and leave it unplugged for at least one hour, it should reset on its own.
Kelly and other UK Appliance Specialists are ready to help you