How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 6991
Experience:  20 yrs. experience with a major worldwide manufacturer.
Type Your UK Appliance Question Here...
Rob is online now
A new question is answered every 9 seconds

my Splendide washer model # XXXXX 129 W Has Displayed F-02

This answer was rated:

my Splendide washer model # XXXXX 129 W Has Displayed F-02 Flashing code. i started a load it would put water in then the code flashed. tried turning breaker off, still will not spin will put water in and drain , can you tell us what to try? Pat
Hi, welcome to Just Answer. My name is XXXXX XXXXX I will be helping you with your problem today. If anything isn't clear, please just ask me.

Sorry for the delay in replying, it seems that no one else has picked up this question. I only just came on line and saw your question. Are you still looking for help with this?

Please don't rate my answer until we have explored all possible avenues. Please just use the reply button to contact me.

F02 on this is a "failure to drain"

This is a bit odd, as you state that it does drain !

Check the filter for any blockages and retry.
If it still gives the code, please let me know what you found in the filter.
Can you then put machine to the rinses. Does the drum turn? Does it drain? Did it spin?

Customer: replied 4 years ago.

Took the front lower cover off .the pump is free, there was not a filter at that area. it will drain, but not spin.


When you have it on a wash cycle does it agitate correctly?

Customer: replied 4 years ago.



In that case there is a problem with either the belt or the motor

Turn off the power
Remove the back panel
Check the belt is in place.
If it is, you need to then check the motor.
First check the carbon brushes.
If they a=re worn, chipped or damaged, this is the problem and you will need to replace them

Let me know what you find
Rob and other UK Appliance Specialists are ready to help you