How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk, Field Service Engineer
Category: UK Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK.
Type Your UK Appliance Question Here...
Techdesk is online now
A new question is answered every 9 seconds

How do I replace the fascia panel on my beko dwd5410 dishw

Resolved Question:

How do I replace the fascia panel on my beko dwd5410 dishwasher
Submitted: 5 years ago.
Category: UK Appliance
Expert:  Techdesk replied 5 years ago.


Unplug the appliance.


Take out the 6 screws across the top of the inner door and down the sides for the depth of the facia panel.

You should now be able to take the facia panel off.


Two types of knob have been used.

1 clips in and the other is a push fit.


Unclip the knob from the inside and take it off.


Lift the knob and pull it out.


Take the screws holding the control board in place out.


Transfer all the parts to the new facia.


Fitting is the reverse of the removal.


Check it out, see how you get on and get back to me if you need more help.


Hope this helps

Let me know how it goes


Techdesk and 2 other UK Appliance Specialists are ready to help you