How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask NeilWill Your Own Question
NeilWill, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 1274
Experience:  Repaired appliances over seas in europe and Middle east .
Type Your UK Appliance Question Here...
NeilWill is online now
A new question is answered every 9 seconds

how to fitt new door seal

Customer Question

how to fitt new door seal
Submitted: 5 years ago.
Category: UK Appliance
Expert:  NeilWill replied 5 years ago.

NeilWill :

Hello, Thank you for using JustAnswer! If you have any questions after reading my answer,be sure to let me know.

NeilWill :

Washer fruidge??

NeilWill :


NeilWill :

Please include model numebr

NeilWill and other UK Appliance Specialists are ready to help you
Expert:  NeilWill replied 5 years ago.
Wher did you go?
Please tell me what the appliance is?
Fridge, Freezer, front load washer/ Please include complete model numebr.
Expert:  NeilWill replied 5 years ago.
You did not tell me what appliance you need to replace the door seal on, or the model number. So i included three videos on how to change the door seal on all three common appliances.

Here is a video showing how to replace a washer door seal.

How to replace a fridge door seal

How to replace a freezer door seal
Customer: replied 5 years ago.
zanussi zwf1020w front load washer fitt door seal
Expert:  NeilWill replied 5 years ago.
This is quite tricky, first take off the retaining ring on the front door port, remove the seal from this rim. The back of the seal is held by a spring band. the best way to remove it is to get a good grip on the seal at the top then lift and pull (thats the easy bit), to put the new one on i always lubricate the recess on the seal with washing-up liquid and feed the seal on from the bottom with one hand whilst following it around with the other hand to stop it coming off. Once it is fully on it can then be rotated easily into the correct position. Getting the spring back on will require an extra pair of hands for obvious reasons.

Here is an AEG washer door seal video that should be simaler to your Zanussi