How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 16360
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your UK Appliance Question Here...
Daniel is online now
A new question is answered every 9 seconds

baumatic bdw13 dishwasher fault code E4 overfill, how do I

This answer was rated:

baumatic bdw13 dishwasher fault code E4 overfill, how do I get it to reset



E4 is an antiflood problem.


What will have happend is water will be in the base and atcivated the switch.


What you need to do is pull the machine out and tip it 45 degs backwards. This will allow the water to drain out from the base.


Or take off the inspection cover on the front at the bottom below the door. From there use a sponge and soak the water up.


Once the water is dryed up from the base the antiflood will reset itself and the machine will start to work again from there.


If you need anymore info just get back to me.



Daniel and other UK Appliance Specialists are ready to help you