How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: TV
Satisfied Customers: 17907
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your TV Question Here...
Pete is online now
A new question is answered every 9 seconds

Could you please advise how to get the EPG working again on

Customer Question

Good Morning,
Could you please advise how to get the EPG working again on my Sharp Aquos Tv?
I have an older Sharp Aquos LCD Tv (Mod: LC-32D77X / 42D77X/46D77X/52D77X) which is working very well but with the recent introduction/addition of new Channels onto the Network my EPG has stopped working. When I use the EPG key on the remote control it displays all the Channel numbers / times but no Program information/titles etc?
On each of the individual channels I still have Program information, operational times etc but only on that channel.
I have followed the booklet guidelines but nothing seems to reinstate the EPG.
Any advice would be appreciated.
Paul ***@******.***
Submitted: 1 year ago.
Category: TV
Expert:  Pete replied 1 year ago.

Hi Paul,

Try the following:

1. Disconnect the antenna and perform an automatic channel tune - this will not detect any channels and will erase the existing ones from memory.

2. Once completed, reattach the antenna and scan automatically for channels again - this will detect the channels once more and add them back into the memory, and they should now have their EPG information once again.