How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie, Technician
Category: TV
Satisfied Customers: 2557
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
Type Your TV Question Here...
Louie is online now
A new question is answered every 9 seconds

Rod I have a wd73727 that i got off a friend. when i got the

Customer Question

I have a wd73727 that i got off a friend. when i got the tv all it will do is green light flash for a short time then tv does not turn on.
Submitted: 1 year ago.
Category: TV
Expert:  Jack replied 1 year ago.

Hi , I`m Jack
Perhaps I can help you with this problem , but first a few questions ;

Expert:  Jack replied 1 year ago.

Which light blinks green at the front , is it the power light ?

Then what happens next , any of the other lights ( status , lamp) blink ?

Customer: replied 1 year ago.
power timer light , no other light
Expert:  Jack replied 1 year ago.

O.k then and the power light blinks for a while and then what , it simply stops ?

You press the power button ad this starts again ?

Expert:  Jack replied 1 year ago.

You said you cleaned it out , did you take off the back cover for example ?

Was it working when you first got it or you got it this way ?

Customer: replied 1 year ago.
the light stop. then try to turn it on and nothing. i tryed to get the codes but no light flash back
No the set was broke
Customer: replied 1 year ago.
he has done a resistor mod on the interface board that run the fan to the lamp
Customer: replied 1 year ago.
i have pushed the device and menu for 5 sec and nothing happens
Expert:  Jack replied 1 year ago.

O.k then , Sorry but I won`t be able to help you if someone got in there and modified wirings and what not

I will opt out and repost your question .

You don`t have to do anything , your question will be reposted for other techs. to see and jump in.

Customer: replied 1 year ago.
ok i can buy a new interface board if that is what needed