How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: TV
Satisfied Customers: 18135
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your TV Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a Panasonic Viera TC-P50G10 and I'm looking

Customer Question

I have a Panasonic Viera TC-P50G10 and I'm looking at your answer to another reader. My TV was flashing 5 times with no picture. I disconnected the SC2 and SC20, but TV did not turn on and flashed 6 times. Any idea what I can do as it seems like I have a different issue to what you already answered?
Submitted: 2 years ago.
Category: TV
Expert:  Pete replied 2 years ago.
I am Pete, and I'll be happy to assist with your question today.
A 6 blink error code indicates a bad Scan Drive board (SC Card).
Since you have already disconnected these, that explains the error code.
Try connecting the SC Cards again and then test the voltage outputs from the power supply board to confirm they are correct.