How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony_Infotech Your Own Question
Anthony_Infotech, Technician
Category: TV
Satisfied Customers: 15000
Experience:  20+ years experience TV expert (field and bench) 9 approved qualifications in TV-ELECTRONICS
Type Your TV Question Here...
Anthony_Infotech is online now
A new question is answered every 9 seconds

KDS60A2000 Red led blinks 4 times, no picture,large fan not

This answer was rated:

KDS60A2000 Red led blinks 4 times, no picture,large fan not turning,can this be fixed by the home owner?
Hello my name is Anthony
Thanks for the Question

I may be a few minutes between each request for info thanks for your patience!

4 blinks means a fan error

Is it the lamp fan not turning?found near the lamp

If you try to push the fan on does it try to go then stop?

Let me know please


Customer: replied 4 years ago.



OK yes its possible for you to replace this fan, its relatively easy do you think you can do that yourself?

I gather what your saying for yes is the fan does run on and stop when knocked on?

I will find the fan for you just need to know your degree of practicality?

Customer: replied 4 years ago.

I think I can do the replacement, however I will need a procedure and a diagram.


OK please just give me 10 mins to upload the diagram and where to get the fan from please

Customer: replied 4 years ago.

Where is the upload going? to my E mail? also where do I give your "Excellent" rating?

Hi Bill

Thats to get at the lamp fan if its not that fan and you mean the scirrocco fan let me know

Customer: replied 4 years ago.

Is there a procedure? Like remove screws 1 thru 4, Disconnect connector etc.


Bill the screws are marked sorry for the diagram I found it hard to get all the picture on however the screws are marked by circles the assembly just pulls out when the screws are removed then you will get access to the fan

Their is no fan removal procedure im afraid the way is to get those three of four screws out then pull the assembly towards you

Anthony_Infotech and other TV Specialists are ready to help you