How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Nolan Your Own Question
Tim Nolan
Tim Nolan, TV Repair Technician
Category: TV
Satisfied Customers: 19454
Experience:  Factory trained TV repair technician. U.S. NAVY trained.
Type Your TV Question Here...
Tim Nolan is online now
A new question is answered every 9 seconds

I have a JVC Model LT-22DM21which uses a RMC1221 remote control.

Resolved Question:

I have a JVC Model LT-22DM21which uses a RMC1221 remote control. I some how lost
most of my analog and digital stations. I tried to retrieve the channels by pushing the
setup/tvmenu button to no avail. I now only get channels 2-13. Is there a way I can
correct my mistake?
Submitted: 5 years ago.
Category: TV
Expert:  Tim Nolan replied 5 years ago.

When you scanned for channels was the ANTENNA/CABLE (or air/cable) setting in the menu set to antenna? If so it will only pick up 2-13.

What you need to do is change it to cable then scan again, you should get channels above 13 at that point. Try that, if it doesnt fix the problem, let me know and we will troubleshoot the problem.

Tim Nolan and other TV Specialists are ready to help you