How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask bluextc89 Your Own Question
bluextc89, Technician
Category: TV
Satisfied Customers: 6556
Experience:  Small Business Owner.
Type Your TV Question Here...
bluextc89 is online now
A new question is answered every 9 seconds

I replaced the bulb in my Sony SXRD KDS-60A200 but I still

Resolved Question:

I replaced the bulb in my Sony SXRD KDS-60A200 but I still get the message that the bulb is nearing the end of is projected lifespan. How do I reset the lamp timer?
Submitted: 5 years ago.
Category: TV
Expert:  bluextc89 replied 5 years ago.
Thanks for stopping by:

From the service manual:

bluextc89 and 3 other TV Specialists are ready to help you
Customer: replied 5 years ago.
I cannot get to the service mode. My TV is connected to my Directv satellite receiver, do I need to unhook it? I am very frustrated with this!
Expert:  bluextc89 replied 5 years ago.
Make sure the tv is OFF before starting step 1.

With tv off...
On the remote quickly press "display" - "5" - "vol+" - "Tv power"

Not all at once - in sequence. It must be done within 3-4 seconds.