How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie, Technician
Category: TV
Satisfied Customers: 2557
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
Type Your TV Question Here...
Louie is online now
A new question is answered every 9 seconds

My Emerson LC320EM81 just stopped working . When I press the

Customer Question

My Emerson LC320EM81 just stopped working . When I press the on button , no lights no sound at all. No click. Fuse on PSU is ok all caps look fine nothing swelled and nothing burnt._ Where should I look next?
Submitted: 7 years ago.
Category: TV
Expert:  Gina King replied 7 years ago.
My name is XXXXX XXXXX I’m a Moderator for JustAnswer.

Thanks for your question! This is not a request for more information and I apologize if this message caused you any confusion.

I'm sorry that you haven't received an answer yet. Most questions are responded to within the hour, but this can depend on different factors, including the difficulty of your question, how many questions are being posted by customers, whether or not this type of question can be answered in an online forum and how many Experts are on the site at the time your question posts.

I will go ahead and try to find an Expert to assist you with your question and appreciate your patience. You will receive an email notification when an Expert replies to you, just as you did here. Unfortunately, I can not guarantee a time-frame for which yours will be answered and I apologize a head of time if the wait is longer than expected.

Please do not reply to this message unless you do not need further help. If that is the case, please let me know and I can assist you with that. When you reply, it locks out the question from the Experts and will slow down their response time to you. If they need more information, they will let you know.

Please remember that if you get a satisfactory answer from your Expert to click the green accept button so the Expert is compensated for a job well done. Positive feedback is appreciated by them also. :)

If you have any questions regarding deposits or billing, please feel free to use the help link below:

Customer: replied 7 years ago.
Well it is as I have stated before. The TV just stopped working like the fuse had blown... no standby light no sound no click when the on button is pushed, so I took the back off and checked the fuse. Fuse is fine. Checked around the power supply for voltages. Without a service manual or a schematic on hand I don't know what to look for exactly , but I did find voltages present at several key areas of the power supply board BA7FOF01041, including a voltage of about 3 vdc at the screen lamp transformers and 167 VDC at the red and black wire connector that goes to the next tan colored board over BA7FOF01024.
The TV seems to be in standby mode although the standby light is not lit. I don't believe there is much wrong with th the TV but I just need some direction to figure out what to check next. Thanx
Customer: replied 7 years ago.
Relist: I still need help.