How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask lrarkdh1 Your Own Question
lrarkdh1
lrarkdh1,
Category: TV
Satisfied Customers: 77
9064699
Type Your TV Question Here...
lrarkdh1 is online now
A new question is answered every 9 seconds

I have a Philips universal remote for my Samsung tv and I dont

Customer Question

I have a Philips universal remote for my Samsung tv and I don't know what code to put in to make the remote work. Can you tell me whaat I need to do. It is a Samsung LT-P 1545 tv
Submitted: 8 years ago.
Category: TV
Expert:  lrarkdh1 replied 8 years ago.
Hello; I believe I can help you. I just need the model # XXXXX your philips remote.

Thank you
Customer: replied 8 years ago.
I think it is CL034. I found that where the battery goes.
Expert:  lrarkdh1 replied 8 years ago.
Hello again; I have found all codes for the Samsung TV. You will have to try all of them. I'm sorry I can't get closer than that.

Here is the directions for entering the code directly.

1. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.

2. Press and release the desired mode button (TV).
The red indicator blinks, then stays lit.

3. Enter the 4 digit code from the code tables (on
separate sheet). Note: after a valid code entry, the
red indicator turns off. For an invalid code, the red
indicator flashes.

4. With your device on, press CHANNEL UP. If the
device responds, no further programming is required.

Here are the codes for your TV
0112, 0309, 0209, 0512, 0302, 0502, 0002, 0102, 0110, 0818, 0895, 0437, 0802, 0103, 0609, 0012, 0212

I also have instructions on how to search for your TV code if you prefer. Directions to follow:

1. Manually turn on the device (TV, VCR, etc.) to be
controlled.

2. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.

3. Press and quickly release the desired mode button
(TV). The red indicator blinks off once.

4. Press the CHANNEL UP button repeatedly (up to
300 times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the CHANNEL DOWN button
to backtrack through the library until the device
changes channel. Pressing CHANNEL UP changes
direction to forward again.

5. Press and release MUTE to install the code.

Hope this helps. Good Luck to you and thank you for the oppurtunity to help you.