Transmissions

Have Transmission Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Transmissions Questions
My 2005 Ford Freestar tranny has stuck in 1st gear a couple
my 2005 Ford Freestar tranny has stuck in 1st gear a couple of times lately, 1st time it was really cold outside. Operated fine for a few blocks then stuck in first, but shifted when I shifted from D … read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,546 satisfied customers
IT IS A FORD 4X4 5 SPEED WHEN I PUT IT IN 1ST-3RD LOUD
IT IS A FORD 4X4 5 SPEED WHEN I PUT IT IN 1ST-3RD LOUD CLUNKING FROM DRIVE TRANE NOT SO MUCH IN 4TH OR 5TH GEAR … read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
30,107 satisfied customers
I have a 09 GMC duramax, I have had two recent times when i
Hi, I have a 09 GMC duramax, I have had two recent times when i pull onto a jobsite, being slightly downhill and shift into reverse to back around into a parking area. Before the truck moves at all i … read more
Gm Tech Cam
Gm Tech Cam
Owner/Technician
Vocational, Technical or Trade Scho
27,420 satisfied customers
I have a 2016 F 150 6 speed trans, have 11,000 miles on it.
I have a 2016 F 150 6 speed trans, have 11,000 miles on it. Every morning when it shifts from 2nd to 3rd it clunks ( like how a u joint would sound in the old days)...The engine is not at operating te… read more
6Bucs
6Bucs
Senior Master Tech
Associate Degree
1,349 satisfied customers
PO62C, PO720 and PO722 after transmission rebuild,
Transmission was just rebuilt and didn't have these codes before … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
2,105 satisfied customers
Transmission/drivetrain loud clunk when shifting from 1st to
Transmission/drivetrain loud clunk when shifting from 1st to 2nd gear, 2nd to third, third to 4th, then not so much. Smg pump replaced six months ago. Smg relay replaced last week, which had the effec… read more
Steve
Steve
Master's Degree
25,263 satisfied customers
Dakota: I have a 2004 Dodge Dakota crew cab*****SLT
I have a 2004 Dodge Dakota crew cab*****SLT pickup. A transmission shop's poorly installed pan gasket allowed fluid to escape from the tranny pan. The check engine light came on and I drove, slowly, 1… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,106 satisfied customers
91 dodge pickup RAM 150, 318 engine, 3 speed automatic
91 dodge pickup RAM 150, 318 engine, 3 speed automatic transmission. Why does the transmission fail to engage after a cold start.… read more
Brad
Brad
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,272 satisfied customers
I have a ford 2002 F250 and I manually in myself in the snow
I have a ford 2002 F250 and I manually in myself in the snow from the electrical switch in cab from 2wd to 4wd and go. Clunking noise, sounds like on drivers side. And when switching back to 2wd on dr… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
2,105 satisfied customers
Mercedes 320 E: Transmission Problem. 1998 Benz 320 E, near
Transmission Problem. 1998 Benz 320 E, near perfect condition, 150,000 miles. Very well maintained by a good dealer. The transmission takes several miles to shift from 4th to 5th gear. It won't shift … read more
sprinkles08
sprinkles08
Technician
High School or GED
19,106 satisfied customers
Ford F-150 FX2: My 2010 Ford F-150 XL 4speed4.6My Transmission
My 2010 Ford F-150 XL 4speed 4.6 My Transmission is acting up Only happens when I am driving. All of a sudden my truck has no forward motion when I press gas RPM goes very high. I pull over, put in pa… read more
Mat
Mat
Ford Senior Master Technician
Associate Degree
956 satisfied customers
What could be causing my 2007 Avalanche to shift real hard
What could be causing my 2007 Avalanche to shift real hard between 1st and 2nd ? It started doing it the first winter but only once or twice - now it's gotten a lot worse in warm weather! what could b… read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,108 satisfied customers
Ford Taurus SEL: I have a 2001 Taurus with about 140,000 on
I have a 2001 Taurus with about 140,000 on it, resurrecting it after sitting for a year and a half. We have been driving it for about six weeks. Today my wife was driving it when it "began making funn… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
2,105 satisfied customers
Transmissions Ford F150 XLT Lariat: I bought a 2001 ford f150
I bought a 2001 ford f150 xlt larriat a few months ago. in looking through the records, i see that the transmission was rebuilt in 2009 and cost around $1884. The truck just recently started making a … read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
39,985 satisfied customers
ford f250hd: have ford f250 4x4 hd. Had trans rebuilt supposedly,
have ford f250 4x4 hd. Had trans rebuilt supposedly, and a new torque converter installed. now it has no 1st gear and must be upshifted from secound to third manually although it will downshift from 3… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
2,105 satisfied customers
I have a 4L60E transmission, and cannot find out what the problem
I have a 4L60E transmission, and cannot find out what the problem is with it. When the transmission is cold, it will shift fine through all of the gears and lock the converter. When it warms up and I … read more
Gm Tech Cam
Gm Tech Cam
Owner/Technician
Vocational, Technical or Trade Scho
27,420 satisfied customers
2008 cx9, transmission lags under 40mph, not a clunk, but
2008 cx9, transmission lags under 40mph, not a clunk, but more like its shifting down then catches back up , starting to get worse..42k more like a thump not continuosly though..random, then goes away… read more
Fix_It_Man
Fix_It_Man
Automotive Repair/Damage Investigator
Associate Degree
14,692 satisfied customers
GMC Sierra 2500 HD SL: 1998 GMC K2500 Extended cab 8600# XXXXX
1998 GMC K2500 Extended cab 8600# XXXXX 8 bolt wheels. 5.7L vortec w/ 4L80E trans. Main purpose of truck is farm use & plow, short trip, minimal use per year (under 1000 mi/yr). Rebuilt trans 2 yrs ag… read more
Gm Tech Cam
Gm Tech Cam
Owner/Technician
Vocational, Technical or Trade Scho
27,420 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Chris (aka- Moose)

Chris (aka- Moose)

Technician

2,105 satisfied customers

16 yrs. experience with auto, manual, & CVT drivelines

Tim&#039;s Auto Repair

Tim's Auto Repair

Mechanic

558 satisfied customers

I have been rebuilding automatic transmissions for 25 years

Gary

Gary

ASE Certified Technician

408 satisfied customers

25 years GM master tech

Matt

Matt

Engineer

168 satisfied customers

Mechanical Engineer BEng Hons22 years experience in car engine industry, 10 years in formula 1

Marty

Marty

Bosch Certified Technician

111 satisfied customers

Bosch certified master technician. Over 35 years experience.

Dave Nova

Dave Nova

ASE Certified Tech

98 satisfied customers

ASE Master Certification. 25 yrs experience

John Mc

John Mc

Trans specialist

93 satisfied customers

Transmission dealer tech for over 19 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x