Transmissions

Have Transmission Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Transmissions Questions
I've heard these transmissions in the cop cars have issues;
I've heard these transmissions in the cop cars have issues; The 13 pin connector was the first thing to be replaced. I pulled it last night and the head of the bolt appears to have broken off inside t… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
2,108 satisfied customers
Transmission was just rebuilt by a local shop I did the
Transmission was just rebuilt by a local shop I did the removal and install of the unit runs okay except for the 3rd to 4th up shift. We're under light acceleration it flares up before going into 4th.… read more
Chad Farhat
Chad Farhat
Owner
Associate Degree
7,808 satisfied customers
My commander gets stuck in 3rd gear sometimes. Had the
my commander gets stuck in 3rd gear sometimes. Had the tranny check at jeep, they replaced the pcm, didn't help. Had jeep check again they said I need a new tranny. Took it to a specialty tranny shop … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
20,080 satisfied customers
All right so i road tested the cft30 07 montego for 50
all right so i road tested the cft30 07 montego for 50 miles, no lights no codes, customer took for the day, said it hit limp mode twice had to shut off and restart. Took it back tcm had a code for ra… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
2,108 satisfied customers
Just put a recycled transmission in my 2004 buick lesabre.
Just put a recycled transmission in my 2004 buick lesabre. Can manually shift from 1 to 2 and 2 to 3, and have reverse, but transmission does not shift automatically. … read more
Eric
Eric
Retired
N/A
38,435 satisfied customers
Seems like I am stuck in 5th gear, no leaks lately, car is
myself; code was p0335 for camshaft/crankshaft position sensor. both been replaced before but plastic connector broke on top/driver side sensor so I'd - literally - duct taped it to hold it in place. that disintegrated over time so I now I used a more stable cable tie solution which seems to be very tight. still getting same codes but now the transmission is behaving funny; no pickup and hard to start; shifting into tiptronic mode and downshifting all the way restores *some* pickup but shift is very jerky and can't downshift unless at a stop … read more
Matt
Matt
Engineer
Bachelor's Degree
168 satisfied customers
I have an 07 duramax with an Allison. Just recently pulling
Hello. I have an 07 duramax with an Allison. Just recently pulling my fifth wheel trans went into limp mode. (Stuck in fourth gear). Only have reverse and fourth. Got home pulled p0761 code. Tried cle… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
17,649 satisfied customers
I have a question about a transmission related problem on my
I have a question about a transmission related problem on my 2001 2.7t I was hoping I could get some assistance with. ill list what it does in order. more than half the time it shifts rough into rever… read more
Eric
Eric
Retired
N/A
38,435 satisfied customers
It's going into limp mode...giving me a code error of Shift
It's going into limp mode...giving me a code error of Shift Solenoids A and C I believe and also gears 3 and 4 are out of ratio. The issue is, before today I would be able to turn my car off and back … read more
sprinkles08
sprinkles08
Technician
High School or GED
19,139 satisfied customers
04 GMC Canyon 3.5l 4wd. P0788 and p2763 code. New shift
04 GMC Canyon 3.5l 4wd. P0788 and p2763 code. New shift solenoid and trans flush. Doesn't shift right when in drive. Shift fine from 1,2,3,d manually. Once code is clear It shifts fine until code ligh… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
2,108 satisfied customers
98 S500 Mercedes Issue - Car had issue with not shifting but
98 S500 MercedesIssue - Car had issue with not shifting but not when I was driving, just when my son was driving. . Then it would not shift for me when I was just leaving to go out of town. I shut it … read more
sprinkles08
sprinkles08
Technician
High School or GED
19,139 satisfied customers
I have a 2005 acura tl it goes down the road then stops
i have a 2005 acura tl it goes down the road then stops shifting park it turn motor turn off and back on to get it to shift right for a good ways nd it stops shifting again and gotta repeat the prosse… read more
Chad Farhat
Chad Farhat
Owner
Associate Degree
7,808 satisfied customers
2006 Kia Sedona- reverse has stopped working, and when
2006 Kia Sedona- reverse has stopped working, and when starting cold feels like it shifts into all forward gears. When trans warms up, will stick in around 3rd gear. Symptoms started a while back when… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,139 satisfied customers
2000 Dodge Dakota w 3.9 V6 42RE transmission Problem started
2000 Dodge Dakota w 3.9 V6 42RE transmission Problem started about a year ago. Transmission would start in limp mode but was able to manually shift to 2nd and get going and them shift manually to 3rd.… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,139 satisfied customers
I have a 2008 cadillac cts 3.6di AWD I have the 6l50
Hi I have a 2008 cadillac cts 3.6di AWD I have the 6l50 tranny in the car. I experience slipping ( revs surge up with no increase in speed in car ) going from 3rd to 4th and once I noticed it I think … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
20,080 satisfied customers
I have a vw passat 2006 2.0t automatic. The problems i have
Hi, i have a vw passat 2006 2.0t automatic. The problems i have is that PRND light on dashboard all light up and the transmission cannot shift to 4th gear, 5th gear, and 6th gear. Reverse is ok. There… read more
gomi_otaku
gomi_otaku
Auto Technician (dealership)
Vocational, Technical or Trade Scho
3,446 satisfied customers
Automatic Transmission F4A33 3000GT SL 1998 DOHC, Shift into
Automatic Transmission F4A33 3000GT SL 1998 DOHC, Shift into 2nd gears by mistake, when up shift from 3rd to 4th. Before it happen, the transmission acting like a delay shift (RPM rev much higher but … read more
Matt
Matt
Engineer
Bachelor's Degree
168 satisfied customers
Ram hemi 2x4: I have a 2011 ram that's gotten stuck in 4th
I have a 2011 ram that's gotten stuck in 4th gear. "Limp home mode" codes are p0750 and p0882. Could this be related to a faulty TIPM?… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,139 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Chris (aka- Moose)

Chris (aka- Moose)

Technician

2,108 satisfied customers

16 yrs. experience with auto, manual, & CVT drivelines

Tim&#039;s Auto Repair

Tim's Auto Repair

Mechanic

561 satisfied customers

I have been rebuilding automatic transmissions for 25 years

Gary

Gary

ASE Certified Technician

408 satisfied customers

25 years GM master tech

Matt

Matt

Engineer

168 satisfied customers

Mechanical Engineer BEng Hons22 years experience in car engine industry, 10 years in formula 1

Marty

Marty

Bosch Certified Technician

111 satisfied customers

Bosch certified master technician. Over 35 years experience.

Dave Nova

Dave Nova

ASE Certified Tech

98 satisfied customers

ASE Master Certification. 25 yrs experience

John Mc

John Mc

Trans specialist

93 satisfied customers

Transmission dealer tech for over 19 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x