How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Transmissions
Satisfied Customers: 22821
Experience:  Chrysler/Dodge/Jeep master tech ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans Specialist
9825021
Type Your Transmissions Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Range rover 2003 message on display transmission failsafe

Customer Question

range rover 2003 message on display transmission failsafe program
JA: When was your transmission fluid last checked?
Customer: one year
JA: Are you fixing your Range Rover yourself? What have you tried so far?
Customer: cheched at auto repair shop
JA: Anything else you want the mechanic to know before I connect you?
Customer: chech coolant level message
Submitted: 7 months ago.
Category: Transmissions
Expert:  sprinkles08 replied 7 months ago.

Hello and welcome to JustAnswer!

There are several things that will cause the transmission to go into limp in and it will require some testing to determine what is going on. The trans goes into limp in when the transmission control module sees a failure that will prevent proper operation and sets fault codes. Possible causes range from solenoids, speed sensors, wiring, the trans controller itself, internal trans issues; there are dozens of possible causes.

The first thing that needs to be done is use a scan tool or code reader to see what fault codes are setting and then testing can be done from there.