How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1726
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
2499435
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I have 2007 tiffin allegro bus. After driving couple hours

Customer Question

I have 2007 tiffin allegro bus. After driving couple hours stopped at rest stop turned off engine when restarted 20 minutes later had engine
JA: How many miles are on the car? Is it an automatic or a manual transmission?
Customer: 2007 Allison when I put in gear got check trans and engine lite was in cripple mode 1 gear rpm and movement but no speed indication. Pulled over and checked fluid levels all ok restarted engine 1 hour later worked fine. Pulled into a diesel repair shop turned off engine when restarted 20 minutes later same problem. Engine and trans temp 185
JA: What is the model of your '07 transmissions?
Customer: Don't know motor home is in shop
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: No it is at freightliner service center
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 8 months ago.
Category: Transmissions
Expert:  Daniel Wilson replied 8 months ago.

Hi my name is***** will be glad to try to help. What is logged for fault codes?

Customer: replied 8 months ago.
I don't know how to access codes. I assume repair facility will get codes but that will be next Monday
Customer: replied 8 months ago.
33,000 miles
Expert:  Daniel Wilson replied 8 months ago.

Without the codes we will only be guessing where to start.... That will tell us what circuit the problem is in.