How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Farhat Your Own Question
Chad Farhat
Chad Farhat, ASE Certified Technician A6 - Electrical / Electronic systems A7 Heating / Air conditioning systems
Category: Transmissions
Satisfied Customers: 3454
Experience:  Owner at Carolina Auto Service & Sales , 20 years Experience in Foreign & Domestic vehicle
Type Your Transmissions Question Here...
Chad Farhat is online now
A new question is answered every 9 seconds

Engine code P2065 and car stuck in 2nd gear. Also will not

Customer Question

engine code P2065 and car stuck in 2nd gear. Also will not shift using bump shift. Can not communicate with transmission computer. found some, but not a lot of transmission fluid at wiring connectors at tcm. I feel like this is likely the TCM, but Im just looking for other opinions. No solder joints are cracked on the tcm and i already tried to clean it off with electronic parts cleaner.
Submitted: 1 year ago.
Category: Transmissions
Expert:  Chad Farhat replied 1 year ago.
Hey my name is ***** ***** I will be assisting you
Expert:  Chad Farhat replied 1 year ago.
Have you checked all fuse and clean connector , most likely you need one.
How many miles on the car
Is there any other faults codes than the 2056Let me knowChad ( aka -Customer)
Expert:  Chad Farhat replied 1 year ago.
Fault description
Expert:  Chad Farhat replied 1 year ago.

cmp sensor location

Customer: replied 1 year ago.

Hey thx for the help so far..I've ordered a transmission control module and I'll get back with you with follow up or a rating when it's in..

Noticed also that you may have responded to me with an answer that may have been meant for someone else? Something about a cmp location..just wanted to let u know so they can get their response

Expert:  Chad Farhat replied 1 year ago.

hey how are you

Thanks for telling me about the post here by mistake should have went to different person correct

in case this module did not fix let me know , we can troubleshoot further .but from what u decribed and what i have seen is usualy the case

if not we just have to trace it ,looking forward to hear from you

good luck

Thank You

Chad ( aka-Jhook1398)