How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Transmissions
Satisfied Customers: 23110
Experience:  Chrysler/Dodge/Jeep master tech ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans Specialist
9825021
Type Your Transmissions Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Saturn SL: replaced transmission in 2001 Saturn, it ran and

Customer Question

replaced transmission in 2001 Saturn, it ran and moved thru the gears, rought but it did move and run, then noticed the axle seal was leaking, so replaced the seal and now it doesn't even want to start, but it in gear and a loud snap was heard, what could be wrong that it doesn't want to even start now
Submitted: 1 year ago.
Category: Transmissions
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!There are many things that can cause a no start condition, especially depending on what it's actually doing. I'm assuming that the engine doesn't crank, which could be a mechanical problem preventing it from physically turning, it could be a range sensor or wiring issue, the ignition switch, starter, starter relay, or the engine controller may not be awake.What happens when you attempt to start the engine?If it doesn't crank, are you able to turn the engine by hand with a socket on the crank damper bolt?