How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1735
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I have 2008 4X4 jeep liberty with automatic trans that wont

Customer Question

i have 2008 4X4 jeep liberty with automatic trans that wont shift above 2nd. the engine and wiggly traction warning lights are on. error codes read no torque signal, and crank/cam position correlation bank 1 sensor A
Submitted: 1 year ago.
Category: Transmissions
Expert:  Greg replied 1 year ago.

Hi .

Can you give me the actual codes .

Have you done anything ,or just had the codes read .

What did you use a good top level scan tool or just a basic code reader