How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1726
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I have a 2008 SRX 3.6 V6. AWD. It will not shift gears as

Customer Question

I have a 2008 SRX 3.6 V6. AWD. It will not shift gears as should. To downshift when passing or going uphill you must either floor the pedal or let go and press again. As if double clutching. Also it does not have the power it should have. And my fuel mileage is 16 on good day. Should be roughly 18-19.. I thought my cats were clogged. Took off muffler and they look good as knew. I'm getting two codes. One for camshaft sensor and one for crank shaft. Changed the camshaft sensors and code is still popping up.
Submitted: 1 year ago.
Category: Transmissions
Expert:  Wayne Crawford replied 1 year ago.

Hello. My name is ***** ***** I will be helping you today.

What codes are coming up?

Customer: replied 1 year ago.
Codes are P0017 & P0008
Expert:  Wayne Crawford replied 1 year ago.

Did you change the camshaft position actuator? If not swap that with the driver side and clear the codes and let me know what comes back.